Medical Device and Pharamaceutical

(empty description)

  • 16 Topics
  • 9 Replies

16 Topics

T
todd caugheyInspiring
asked in Medical Device and Pharamaceutical

Subcontract Alternate Part Questions

We have two assemblies - one assembled in-house as a regular manufactured part to be used in the final assembled system.  The other is the same part, assembled from the same sub-components, but obtained from a sub-contract supplier.  The subcontracted part is an alternate for the primary assembly part in cases where outside labor is needed.  These are currently set up as a manufactured part and a purchased part, respectively.  We see that PO suggestions does not suggest purchasing the subcontract version when stock is low for the primary or the alternate.We are trying to re-think the nature of the two parts.  My hunch is that we should make the alternate assembly a straight purchased part and not as a subcontract operation on a job.  I do not believe they are sending the subcomponents out to the supplier to assemble but rather having them secure the components themselves and “sell” the finished alternative part.  This would allow PO Suggestions to deal with it.Any thoughts on handling

1
H
4 months ago
M
Michele HarhutCommunity Manager
posted in Medical Device and Pharamaceutical

Epicor Product Advisory Board

My name is Mark Kaminski, I am a Principal Product Manager at Epicor and I am looking for customers that would like to be apart of a Product Advisory Board I am putting together.I am looking for our Medical Device or Regulated customers. I am looking to get feedback from our customers that have challenges with missing features around the Med Device or regulated workflow. I understand there are gaps in the offering and I want to close those gaps. I would like to hear from our customers about our gaps and the needs our customers have. We believe we understand our challenges but want confirmation from the customers instead of building what we think we should. I would also like to understand what workarounds you have in place to bridge the gaps that could be eliminated with enhanced features.If this sounds like something you would like to be a part of, please email me and we can get started. If you have any questions, please feel free to reach out to me. Thanks for your time and have a gre

1
S
6 months ago
S
svannimantyberNew Participant
posted in Medical Device and Pharamaceutical

Reinvigorating this SIG for Medical Devices and Pharmaceuticals

With eDHR on the horizon, Integration with Mattec and a host of other topics specific to Medical Devices and Pharmaceutical, I would like to see if we could possibly reinvigorate this SIG.Especially with the advancement of Zoom & Teams, it should make participating in a vertical SIG much easier than in the past.I’m more than happy to do the heavy lifting to get this off the ground.Is there Interest? How do we find/notify other Epicor MD&P companies What’s your top 2 topics when it comes to Epicor MD&P?Many Thanks,Steve van NimanTyber Medical

1
P
1 year ago
C
chansenParticipating Frequently
posted in Medical Device and Pharamaceutical

Med Device Recording-20140228 2013-1 (1)

Here's the attachment: Med Device Recording-20140228 2013-1 (1)

0
C
2 years ago
A
Anonymous
posted in Medical Device and Pharamaceutical

Insights 2017: What topics would you like to see included in the Medical Device SIG session?

Insights 2017: What topics would you like to see included in the Medical Device SIG session?

2
A
6 years ago
J
jmesianoKnown Participant
posted in Medical Device and Pharamaceutical

Looking for Pharma company using Epicor

Are there any pharma companies out there that actually manufacture pure pharma (not devices)?  Jennifer Mesiano

1
A
7 years ago
C
chansenParticipating Frequently
posted in Medical Device and Pharamaceutical

Feb 2014 Medical Device and Pharmaceutical SIG Virtual Meeting

Join us for the second Epicor Users Group (EUG) Epicor Medical Device and Pharmaceutical Manufacturers Special Interest Group (SIG) Virtual Meeting on Monday, February 3, 2014 at 10-12:00 central, 8-10:00 pacific, 11-1:00 eastern to hear about the latest tips and tricks for Epicor Medical Device Manufacturers.In this informative virtual meeting we will be discussing: Electronic Signatures and BPM—User demonstration of creating top BPMs in their business; including Electronic Signatures Enhanced Quality—Learn how to manage controlled test plans and the results for products, groups of products, processes, and other testing. This solution offers the ability to define testing elements or attributes as well as lists of attributes to test which can be used to measure against testing results for pass/fail decision criteria.  Serial Numbers—Understand how Epicor tracks serialized products through the software and how you can leverage this capability in your business.  Wrap-up and next meeting

1
C
9 years ago
C
carl.heederInspiring
posted in Medical Device and Pharamaceutical

Virtual Forum

I want to thank all of you who logged in yesterday to hear and see the presentation on Validation. I was very pleased by the number of participants and by the presentations and hope you were as well.   And again, I invite your comments about the presentation both good and bad, and we are asking for your ideas for future events.   Thanks again......  

0
C
9 years ago
C
chansenParticipating Frequently
posted in Medical Device and Pharamaceutical

Medical Device SIG Meeting

  Please join us for the inaugural Epicor Users Group (EUG) Epicor Medical Device Manufacturers Special Interest Group (SIG) Virtual Meeting on Wednesday, October 9, 2013 to hear about the latest tips and tricks for Epicor Medical Device Manufacturers. In this informative virtual meeting, we will be discussing: Software Validation—Understand the requirements of FDA Part 11 for software validation with respect to your Epicor solution. Discussion led by Michael Heaps, IQS Automated Testing for Epicor (ATE) Overview—An overview demonstration of the automated testing tool that Epicor has developed to make it easier to build and deploy validation scripts against the Epicor ERP environment. Brad Boren from Epicor will be online to go over this with us. Online Discussion on Software Validation—Ask your questions for online collaboration with other device manufacturers. Wrap-up and next meeting discussion We are personally inviting you to be part of thi

1
C
9 years ago
C
carl.heederInspiring
posted in Medical Device and Pharamaceutical

Sunshine Law

Don't foregt our Virtual Forum scheduled for Oct 9 at 2PM central time that reviews Validation issues and techniques. As a potential future topic, I will be recommending the Sunshine Law. And I wanted to mention that we have found a pretty good solution for recording and reporting travel and entertainment expenses involving physicians and health care providers. If anyone wants to know more, please contact me

0
C
9 years ago
C
carl.heederInspiring
posted in Medical Device and Pharamaceutical

Installation Validation

Some of you have asked me about what IDEV has done to validate the Vantage installation.  If there is an interest in this, I can post how we did this...  Let me know

0
C
9 years ago
C
carl.heederInspiring
posted in Medical Device and Pharamaceutical

Please see Files

I've uploaded copies of the forms we use to docment systm chages and invite others to do the same.   Also in E9 area, I;ve uploaded code to create a log file of changes when one is not provided by Epicor or when you want an easier one to work with and report from.

0
C
9 years ago
C
carl.heederInspiring
posted in Medical Device and Pharamaceutical

Copy SCRF Customization, Test Plan and Implementation

Here's the attachment:

0
C
9 years ago
C
carl.heederInspiring
posted in Medical Device and Pharamaceutical

FRM00126_1 Form System Change Request Form

Here's the attachment:

0
C
9 years ago
C
carl.heederInspiring
posted in Medical Device and Pharamaceutical

Retrospective Validation of Systems for New Markets

A quality consulting firm that I know is holding a WebEx on this topic. If you have interest or want to learn more, contact me directly, please. Carl Heeder, CFADirector, ERP SystemsIDEV Technologies, Inc.253 Medical Center Blvd.Webster, TX 77598281-525-2188cell 281-797-2200

0
C
9 years ago
M
MercerKnown Participant
posted in Medical Device and Pharamaceutical

Welcome to the Medical Device SIG

I am excited to see the formation of this Special Interest Group. Please don't hesitate to send me feedback on the SIG and the way the this work. A Mercer SissonPresident - Epicor Users GroupSystem Manager - Insaco Inc

1
T
9 years ago
Terms & Conditions